Filter
Top Products
146 Configure device menu ENWW
EIO submenu
The EIO (enhanced input/output) submenu appears only when an EIO device is installed
in an EIO slot on the MFP (such as an HP Jetdirect print server). The items in the menu
depend on the particular MFP. If the MFP contains an HP Jetdirect print server EIO card,
you can configure basic networking parameters by using the EIO menu. These and other
parameters can also be configured through HP Web Jetadmin or other network
configuration tools (such as by using Telnet or browsing with the embedded Web server).
Item Options Values Explanation
DLC/LLC ENABLE ON
OFF
Use this item to specify whether the
DLC/LLC protocol stack is enabled
(ON) or disabled (OFF).
IPX/SPX ENABLE
FRAME TYPE
ON
OFF
AUTO
EN_8023
EN_II
EN_8022
EN_SNAP
Use this item to specify whether the
IPX/SPX protocol stack is enabled
(ON) or disabled (OFF).
Use this item to specify the frame
type setting for your network.
AUTO (the default): Automatically sets
and limits the frame type to the first
one that is detected.
For an Ethernet network only, frame-
type selections include EN_8023,
EN_II, EN_8022, and EN_SNAP.