Filter
Top Products
ENWW 2 Copying 37
Copying instructions
For standard-size media, the size of the original is automatically detected when the
document is placed on the scanner glass or in the ADF, and the appropriate size of media
is used for the copy. You can override the auto-detect feature by specifying the required
input (DESCRIBE ORIGINAL) and output (COPY SETTINGS) at the control panel.
Note Use the scanner glass to copy small, lightweight (less than 46 g/m
2
, or 12 lb), or irregularly
sized originals, such as receipts, newspaper clippings, photographs, or old, delicate,
valuable, or worn documents. The scanner glass is also used to copy books, magazines,
and manuals.
Use the MFP to make as many as 999 copies of a document. The ADF can be loaded with
up to 50 sheets of ledger/A3 media or 100 sheets of letter/A4 media (depending on the
thickness of the pages).
Note The 8.5 x 13 and 12 x 18 media sizes are not supported for copying.
This section provides instructions for the following copying tasks:
● Copying by using the default settings
● Copying by using user-defined settings
● Copying from the scanner glass
● Copying by using the ADF
● Copying books
● Creating a job to be copied later
Copying by using the default settings
The following are the default settings for copying:
● One copy
● Letter- or A4-size original and letter-size copy
Note The MFP automatically detects the original size and makes a same-size copy. The factory
default paper-size setting is Letter or A4 only if no media size is detected.
● Black and white (color copies can be selected)
● Page Orientation: Portrait
● Number of Sides: One
● Page Content: Mixed (mixed text and graphics)
● Job Mode: Off
● Heavy Paper: Off
To make color copies by using the default settings
1 Place the document face-down on the scanner glass or in the ADF.
2 Touch C
OPY.
3 Select color copies.