Filter
Top Products
64 Remote fax configuration ENWW
Remote fax configuration
In addition to using the MFP control panel for fax configuration, network administrators can
configure the fax remotely by using various software tools. Because the MFP contains an
embedded Web server (EWS), administrators can configure the fax by using either a Web
browser or HP Web Jetadmin. If it installed in the MFP, administrators can also use the
HP MFP Digital Sending Software Configuration Utility to configure the fax on a network-
connected computer. These tools provide access to most of the fax configuration settings
that are available on the MFP fax menu. Network administrators configure the settings,
and then users can change the settings at the MFP control panel.
Note HP MFP Digital Sending Software Configuration Utility can be used to turn the analog fax
feature on or off from the MFP control panel. If the analog fax is disabled by using the utility,
and then the MFP is detached from the utility, you will not see Send to Fax in the EWS or
HP Web Jetadmin Digital Sending menu. See “To set the analog MFP fax settings from the
HP MFP Digital Sending Software Configuration Utility” on page 65 to turn on the analog
fax for the MFP.
Web browser
Use the MFP EWS to gain access to and set the analog fax settings.
To use a Web browser to gain access to the EWS fax setting screens
1 Type the IP address of the MFP in the browser URL address bar and press Enter to
open the EWS Configure MFP screen.
2 Click the Digital Sending tab.
3 Click the Send to Fax tab.
4 On the Fax Settings screen, make any appropriate changes to the settings and then
touch O
K.
5 Click the Edit tab to open the Advanced MFP Modem Settings screen and establish
additional fax settings.
HP Web Jetadmin
For detailed information about HP Web Jetadmin, see the HP Web Jetadmin Reference
Manual.
Note Before HP Web Jetadmin can open the MFP Digital Sending configuration pages, the
hpjdigsending.fpm plug-in must be installed. If you do not have this plug-in, you can
download it at www.hp.com
. See the HP Web Jetadmin Reference Manual for information
about installing plug-ins.
To set the analog MFP fax settings through HP Web Jetadmin
1 Start HP Web Jetadmin.
2 In the At a Glance text box, type the IP address of the MFP in the Quick Device Find
text box, and then select GO to show the device status in the right pane. Select Digital
Sending from the status drop-down menu.