Filter
Top Products
ENWW 6 Control-panel menus 135
PAPER DESTINATION UPPER BIN
LOWER BIN
BIN 1
BIN 2
BIN 3
BIN 4
BIN 5
BIN 6
BIN 7
BIN 8
BOOKLET BIN
Use this item to set the output destination.
Only the installed bins appear on the menu
and the value depends on the finishing
device that is installed.
DUPLEX *OFF
ON
This item appears only when a duplexer is
installed. Set the value to ON to print on both
sides (duplex) or OFF to print on one side
(simplex) of a sheet of paper.
Note
It is best to set the duplex option in the printer
driver or software program. (Printer-driver
and software-program settings override
control-panel settings.)
DUPLEX BINDING *LONG EDGE
SHORT EDGE
Use this item to change the binding edge for
duplex printing. The menu item appears
when a duplexer is installed in the printer and
DUPLEX=ON.
Note
It is best to set the binding layout in the
printer driver or software program. (Printer-
driver and software-program settings override
control-panel settings.)
OVERRIDE A4/LETTER *YES
NO
Use this item to print on letter-size media
when an A4 job is sent but no A4-size media
is loaded in the MFP (or to print on A4-size
media when a letter job is sent but no letter
media is loaded in the MFP).
Note
This item also applies to A3- and 11 x 17 size
media.
MANUAL FEED *OFF
ON
Feed the media manually from tray 1, rather
than automatically from a tray. When
MANUAL FEED=ON and tray 1 is empty, the MFP
stops and displays MANUALLY FEED [PAPER
TYPE SIZE].
COURIER FONT *REGULAR
DARK
Use this item to select the version of Courier
font to use:
REGULAR: The internal Courier font that is
available on the HP LaserJet 4 Series
printers.
DARK: The internal Courier font that is
available on the HP LaserJet III Series
printers.
Item Values Explanation