Filter
Top Products
388 ENWW
Unpacking and installing the 2,000-sheet
side input tray (tray 4)
WARNING!
The 2,000-sheet side input tray (tray 4) is heavy. Two people are
required in order to lift the 2,000-sheet side input tray (tray 4) out
of the box.
1 Remove the external styrofoam pieces from the cardboard
box.
2 Remove the 2,000-sheet side input tray (tray 4) from the
cardboard box.
Note
See the illustrations on the box for information about removing the
2,000-sheet side input tray (tray 4) from its packaging.
3 Position the 2,000-sheet side input tray (tray 4) with the
casters on the floor.
4 Remove all of the foam and orange tape from the 2,000-sheet
side input tray (tray 4).
5 Remove the plastic bags from the cables.
6 Remove the latching bracket from the plastic bag, and remove
the orange block from inside the tray.
Note
Make sure that the MFP is turned off while installing the 2,000-
sheet side input tray (tray 4).
7 Position the 2,000-sheet side input tray (tray 4) at the right
side of the MFP (1) and slide the blue bracket up to unlock the
rod. CAUTION: The blue bracket might break if you do not
slide it upward before lowering the connecting rod.
Lower the connecting rod to a horizontal position (2).
2
3
6
7
1
2
1