Filter
Top Products
ENWW 9 Managing and maintaining 221
Image transfer kit
The image transfer kit contains the following parts: the transfer roller, the transfer belt, one
filter, one toner wipe, two small tray rollers, and seven large tray rollers.
The image transfer kit should be replaced after every 200,000 pages of printing. When the
counter reaches 200,000 pages, the MFP stops printing until the kit is replaced and the
count is reset at the control panel.
Hewlett-Packard recommends that you place an order for a replacement image transfer kit
when the ORDER TRANSFER KIT message first appears on the control-panel display.
The part number for the image transfer kit for the HP Color LaserJet 9500mfp is C8555A.
To order an image transfer kit, see “Ordering supplies” on page 212.