Filter
Top Products
140 Configure device menu ENWW
System setup submenu
Items in this menu affect the MFP function. Configure the MFP according to your printing
needs.
Note When a value is specified with an ( * ), that value is the factory (default) setting.
Item Values Explanation
DATE/TIME DATE
DATE FORMAT
TIME
TIME FORMAT
Use this item to set the day, month, year,
and time by using the controls on the
control-panel display.
JOB STORAGE LIMIT=32 1 to 100 Use this item to specify the number of
jobs that can be stored on the hard disk.
The factory (default) setting is 32
JOB HELD TIMEOUT *OFF
1 HOUR
4 HOURS
1 DAY
1 WEEK
Use this item to set the amount of time
that QuickCopy, proof and hold, private,
and stored jobs are kept before being
automatically deleted from the queue.
SHOW ADDRESS *AUTO
OFF
Use this item to define whether or not the
printer IP address appears on the control
panel with the READY message. If AUTO is
selected, the IP address of the device is
shown if the device is connected to a
network.
OPTIMUM SPEED/COST *AUTO
SPEED
COST PER PAGE
Use this item to control how the MFP
switches from color mode to
monochrome mode. AUTO switches
between modes based on the job being
printed. SPEED increases print speed but
is not as efficient when switching modes.
COST PER PAGE slows print speed but is
the most cost-effective option for
switching modes.