Filter
Top Products
ENWW 9 Managing and maintaining 201
To install Flash Memory cards
1 If you have not already done so, print a configuration page to
find out how much memory is installed in the MFP before
adding more memory. (Press 22 on the numeric keypad when
the MFP is idle.)
2 Turn the MFP off and disconnect the power cord from the
outlet.
3 Remove the eight screws on the back of the MFP formatter
board.
4 Grasp the handle and pull the formatter board out of the MFP.
Place it on a flat, nonconductive surface.
5 Remove the Flash Memory card from the antistatic package.
Hold the Flash Memory card with your fingers against the side
edges of the card and your thumbs against he back edge.
Align the notches on the Flash Memory card with the Flash
Memory card slot.
6 Press the Flash Memory card straight in the slot (press
firmly).
7 Holding the black tab near the top, slide the formatter board
back into the MFP and tighten the eight screws.
8 Plug the power cord into the wall, and turn on the MFP.
3
4
2
7
8