Filter
Top Products
302 Understanding MFP messages ENWW
PASSWORD OR NAME IS
INCORRECT
PLEASE ENTER CORRECT
LOGIN
The required login name or password is
incorrect.
Make sure the login name and password
are correct. It the message appears
again, check with your network
administrator.
PAUSED The MFP is paused. Press the MENU button and then touch
RESUME to continue.
PERFORMING...
COLOR BAND TEST
A color band test is being performed. No action is necessary.
PERFORMING...
PAPER PATH TEST
A paper path test is being performed. No action is necessary.
PERFORMING UPGRADE The MFP is performing a firmware
upgrade.
Do not interrupt the upgrading process
by turning off the MFP or unplugging it.
The MFP will restart automatically when
the upgrade is complete.
PHONE BOOK IS FULL.
TO ADD A PHONE NUMBER YOU
MUST FIRST DELETE A PHONE
NUMBER.
The fax phone book is full. Delete unnecessary fax numbers.
PIN IS INCORRECT.
PLEASE RE-ENTER PIN.
The pin that was typed is incorrect. Make sure that the password is correct.
If the message appears again, check
with your network administrator.
PIN IS INVALID.
PLEASE ENTER A 4-DIGIT
NUMBER.
The pin that was typed is incorrect. Make sure that the password is correct.
If the message appears again, check
with your network administrator.
PLACE NEXT ORIGINAL ON
GLASS AND PRESS START TO
SCAN PAGE OR TOUCH
FINISHED TO PRINT NOW.
The MFP is performing a job mode job.
Job mode allows multiple scans from
the scanner glass to be grouped into a
single job.
1 Place the next original copy in the
job on the scanner glass.
2 Press the S
TART button.
3 Touch FINISHED when the last page
of the job is scanned.
PLEASE TURN DEVICE OFF
AND INSTALL HARD DISK
The hard disk EIO card might be loose
or disconnected.
1 Turn off the MFP.
2 Remove and then reseat the hard
disk EIO card.
3 Turn on the MFP.
PLEASE WAIT The MFP is going offline. No action is necessary.
PRINTING STOPPED
TO CONTINUE TOUCH OK
Time expired during a print/stop test. Touch O
K to continue.
PRINTING...
CMYK SAMPLES
The CMYK color samples pages are
being generated. The MFP returns to
Ready when the job is complete.
No action is necessary.
PRINTING...
CONFIGURATION
A configuration page is being generated. No action is necessary.
PRINTING...
DEMO PAGE
A demo page is being generated. No action is necessary.
PRINTING...
ENGINE TEST
An engine test page is being generated. No action is necessary.
Message Description or explanation Recommended action