Filter
Top Products
ENWW 1 MFP basics 33
Loading the staple cartridge (3,000-sheet stapler/stacker)
Use this procedure to load staples in the 3,000-sheet stapler/stacker.
The message STAPLER LOW ON STAPLES appears on the control panel if the staple cartridge
has 20 to 50 staples remaining. The message STAPLER OUT OF STAPLES appears on the
control panel if the stapler cartridge contains no more staples.
To load the staple cartridge
1 Move the 3,000-sheet stapler/stacker away from the MFP.
2 Open the stapler unit door.
3 On the empty staple cartridge, pull up on the green tab, and
then pull the empty cartridge out.
4 Insert the new staple cartridge, and push down on the green
tab so that the cartridge locks into place.
5 Close the stapler unit door and attach the 3,000-sheet
stapler/stacker to the MFP.
1
4
2
3
5