Filter
Top Products
ENWW D Setting up the MFP 387
7 Repeat steps 3 through 6, using the appropriate colors, to
install the remaining three image drums. Close the image-
drum door, pressing the tabs at the top of the door until they
click into place.
8 Rotate the blue dial downward (1) until it stops and then swing
the large, green lever up (2).
9 Close the front doors.
Installing the finishing device
1 Remove the finishing device from its packaging.
WARNING!
The finishing device is heavy. Two people are required in order to
remove the finishing device from the box.
2 Install the finishing device that you purchased. Use the
installation instructions that are packaged with the finishing
device. The finishing device is one of four types: the 3,000-
sheet stacker (1), the multifunction finisher (2), the 3,000-
sheet stapler/stacker (3), the 8-bin mailbox (4).
8
7
1
2
2
1
1
2
3
4