Filter
Top Products
130 Configure device menu ENWW
Configure device menu
This menu contains controls for all of the MFP administrative functions.
Originals submenu
This submenu controls the default settings for several of the copying functions that relate
to the type of originals that are being copied.
Note When a value is specified with an ( * ), that value is the factory (default) setting.
Item Values Explanation
PAPER SIZE *AUTO
LETTER
LEDGER
LEGAL
EXEC
A3
A4
A5
B4
B5
BOOK
Use this item to specify the media size of the
original document.
The MFP uses the media sensors to
automatically describe the size of the original
document. If media is not detected, you can
select from a list of supported media sizes.
NUMBER OF SIDES *1
2
Use this item to determine whether one side
or both sides of the original document are
scanned.
The MFP prompts you to turn the page over if
2 is selected and the original is placed on the
scanner glass.
ORIENTATION *PORTRAIT
LANDSCAPE
Use this item to determine whether the
orientation of the original is portrait (short
edge top) or landscape (long edge top).
CONTENT TEXT
PHOTO
GLOSSY PHOTO
MIXED
Use this item to describe the type of image
that the original contains.
Select text for the best text quality, photo for
printed halftone graphics, glossy photo for
photographs, or mixed if the original is text
and graphics.
TEXT/PHOTO MIX 0-8 Use this item to determine the priority of text
and graphics if CONTENT is defined as mixed.
(This item only appears if MIXED is set as the
default). You can select from nine increments.
0=emphasis on text
8=emphasis on graphics
HEAVY PAPER ON
*OFF
Use this item to determine whether heavy
media is being scanned.
If HEAVY PAPER is set to ON, the scanner will
adjust the tension on the media as it moves
through the scanning area. The setting can
impact output quality for media with weights
more than 100 g/m² (26-lb bond).