Filter
Top Products
ENWW 10 Problem solving 337
Printing stops in the middle of the
job.
● Check the control-panel display for an error message.
● If you are on a network, make sure that the computer is
correctly configured and that no network problem exists
(see your network administrator).
● Check the line voltage to make sure that it is steady and
within the MFP specifications. Turn the MFP off and then
back on.
● Check the time-out setting in your network program. You
might need to increase it.
● If you are trying to copy a file to the MFP from the
MS-DOS prompt, use the copy command
COPY [filename] LPTn /B MFP port, such as LPT1
(where n is the port number).
Note
To send the page to the output bin, you might have to send a
form-feed command from the computer.
The MFP printed on only one side
of the media rather than on both
sides.
Make sure that the option to print on both sides of the media
(duplexing) is configured in the printer driver.
Situation Solution