Filter
Top Products
170 ENWW
Standard (such as
legal, 11 x 17, and A3)
and custom sizes, long
edge between 210 mm
(8.25 inches) and
432 mm (17 inches),
short edge between
148 mm (5.9 inches)
and 297 mm
(11.75 inches)
(weights up to
200 g/m
2
) (53-lb bond).
Note
Print in this orientation
when printing a booklet
on A4 or letter paper
using the multifunction
finisher.
2 or 3 Yes Top of page toward the right side of the tray; first
side to be printed on facing up.
Prepunched letter or A4
(weights up to
220 g/m
2
) (58-lb bond).
Note
If you are using
prepunched media that
is also preprinted, set
the type to P
REPRINTED.
1 No Long edge with holes toward the MFP; top of
page toward the rear of the MFP; side to be
printed on facing up.
Prepunched letter or A4
(weights up to
220 g/m
2
) (58-lb bond).
Note
If you are using
prepunched media that
is also preprinted, set
the type to P
REPRINTED.
1 Yes Long edge with holes toward the MFP; top of
page toward the rear of the MFP; side to be
printed on facing down.
Prepunched letter or A4
(weights up to
200 g/m
2
) (53-lb bond).
Note
If you are using
prepunched media that
is also preprinted, set
the type to P
REPRINTED.
2 or 3 No Long edge with holes toward the right side of the
tray; top of page toward the front of the tray; side
to be printed on facing down.
Table 1. Orienting media
Media Tray Duplex Orientation