Filter
Top Products
ENWW 10 Problem solving 309
TYPE MISMATCH IN TRAY XX The MFP detected a different type of
media than what was specified for the
tray in use.
1 Make sure that the correct media is
loaded in the tray.
2 Check the driver settings to make
sure that the correct media type is
selected.
3 Check the media-type settings on
the control-panel display to make
sure that the MFP is set for the
media that is loaded in the tray.
4 See the MFP software online help
for more information.
UNABLE TO SEND FAX
PLEASE CHECK FAX
CONFIGURATION
The MFP is unable to send a fax. See “Faxing” on page 51.
UNSUPPORTED DATA ON FLASH
DIMM IN SLOT X
TO CLEAR TOUCH OK.
The data on the DIMM is not supported. Press the S
ELECT button to continue.
UNSUPPORTED DATA ON ROM
DIMM IN SLOT X
TO CLEAR TOUCH OK.
The data on the DIMM is not supported. Press the S
ELECT button to continue.
UPPER LEFT BIN FULL
REMOVE ALL PAPER FROM BIN
The specified bin is full. Empty the bin and continue printing.
USB DEVICE X FILE
OPERATION FAILED
The requested operation cannot be
performed.
Check the file name and try again.
USB DEVICE X FILE SYSTEM
IS FULL
The storage device on the USB port is
full.
Delete some files from the storage
device on the USB port and then try
again. HP Web Jetadmin can be used to
delete files and fonts. Use the control
panel to delete stored jobs that are no
longer needed.
USB DEVICE X IS WRITE
PROTECTED
The storage device on the USB port is
protected and no new files can be
written to it.
Fonts and forms cannot be stored on the
storage device on the USB port when
the disk is write protected. Use
Windows-based HP Web Jetadmin or
Macintosh-based HP LaserJet Utility to
remove the write protection from the
disk.
USB DEVICE X NOT
INITIALIZED
The storage device on the USB port is
not initialized.
Initialize the disk file system by using
HP Web Jetadmin.
USE TRAY XX [TYPE] [SIZE]
TO CHANGE TOUCH NEXT. TO
USE TOUCH OK.
The O
K option was touched when a
LOAD TRAY message appeared on the
control-panel display.
1 Touch OK.
2 Touch N
EXT to scroll to the media
size and type that you want to use to
print from a different tray.
3 Touch O
K.
4 Touch E
XIT to return to the
message.
USER NAME OR JOB NAME IS
MISSING
The required information is missing. Check your user name and job name,
and then try again.
Message Description or explanation Recommended action