Filter
Top Products
138 Configure device menu ENWW
Print quality submenu
Some items in this menu are available from a software program or from the driver (if the
appropriate driver is installed). Driver and software program settings override control-panel
settings. For more information, see “Using the printer driver” on page 94.
Item Values Explanation
ADJUST COLOR HIGHLIGHTS
MIDTONES
SHADOWS
RESTORE COLOR VALUES
Use this item to modify half-tone settings for
each color density (cyan, magenta, yellow, and
black). The color density value range is -5 to +5.
Negative adjustments lighten the tone curve and
positive adjustments darken the tone curve. The
factory (default) setting is 0.
SET
REGISTRATION
PRINT TEST PAGE
SOURCE
ADJUST TRAY 1
ADJUST TRAY 2
ADJUST TRAY 3
ADJUST TRAY 4
Shift the margin alignment to center the image
on the page from top to bottom, and left to right.
You can also align the image on the front with
the image that is printed on the back.
Additional instructions are printed on the test
page when the source is selected and PRINT
TEST PAGE is selected.
PRINT MODES AUTO SENSE MODE
AUTO SENSE OFF
LIGHT MODE
HEAVY MODE
CARDSTOCK MODE
TRANSPARENCY MODE
ENVELOPE MODE
LABEL MODE
GLOSSY MODE
IMAGE MODE
HVY GLOSSY MODE
NON HP HVY GLOSSY MODE
BEST GLOSSY MODE
BEST HP HVY GLOSSY MODE
BEST NON HP HVY GLOSSY MODE
BEST TOUGH PAPER MODE
TONER MODE
TOUGH PAPER MODE
BLISTERS MODE
Use this item to configure the mode that is
associated with the media type that you want to
use. For each of the following types, any of the
modes listed in the values column can be set.
PLAIN
PREPRINTED
LETTERHEAD
TRANSPARENCY
PREPUNCHED
LABELS
BOND
RECYCLED
COLOR
LIGHT<75 G/M2
HEAVY 106-163
CARDSTOCK>163 G/M2
GLOSSY 75-105 G/M2
HEAVY GLOSSY
NON HP HEAVY
HVY GLOSS
HIGH GLOSS IMAGE
TOUGH PAPER
ENVELOPE
RESTORE MODES
OPTIMIZE TRANSFER UP 1
TRANSFER UP 2
TRANSFER DOWN 1
TRANSFER DOWN 2
HIGH COVERAGE 1
HIGH COVERAGE 2
HIGH COVERAGE 3
LEADING EDGE UP
LEADING EDGE DOWN
RESTORE OPTIMIZE
Use this item to optimize a number of engine
parameters for all jobs rather than by media
type. Each item can be set to OFF or ON. The
default value of each item is OFF. The RESTORE
OPTIMIZE option resets all options to the factory
default position (OFF). For more information
about optimize values, see “Optimize” on
page 192.