Filter
Top Products
236 Cleaning procedures ENWW
To clean the top ADF glass strip
If you are still experiencing poor copy quality, you might need to
clean the top ADF glass strip.
CAUTION
Clean this area only if you see copy defects such as streaks, and
you notice dust
inside the glass strip. Cleaning this area
frequently could introduce dust into the MFP.
1 Open the ADF cover.
2 Locate the latch that releases the top ADF glass strip. Push
the latch to the left, and pull down to expose the inside of the
glass strip.
3 Gently wipe the glass with a dry, lint-free cloth.
CAUTION
Use dry cloth only in this area. Do not use solvents, cleaners,
water, or compressed air. Doing so could severely damage the
MFP.
4 Pull up on the latch to return the glass strip to its normal
position.
5 Close the ADF cover.
1
2
4
5