Filter
Top Products
28 Loading input trays ENWW
To load the 2,000-sheet side input tray (tray 4)
The 2,000-sheet side input tray (tray 4) holds up to 2,000 sheets
of media. For media specifications, see “Recommended media”
on page 172.
The 2,000-sheet side input tray (tray 4) only supports A4- or
letter-size media. If you are using media that is lighter or heavier
than 75 g/m
2
to 105 g/m
2
(20 to 28 lb), or if you are using coated
media, set the media type for the tray. To set the media type for
the tray or to use other sizes of media, see “Setting media size
and type” on page 164.
CAUTION
To avoid a jam, never add or remove media from the tray while
printing from that tray.
Use this procedure to load media in the 2,000-sheet side input
tray (tray 4).
1 Open the top door, and then open the bottom door.
2 Load the media so that the side to be printed on faces up and
the long edge is toward the MFP (short edge is toward the
MFP if you are making booklets). Do not load more media
than the maximum that is indicated by the media-fill triangles
at the back of the 2,000-sheet side input tray (tray 4).
Note
The number of sheets that can be loaded might vary depending
on the type of media. Use the media-fill triangles to determine
how much media to load.
Make sure that the corners of the media are not folded.
The 2,000-sheet side input tray (tray 4) supports letter, A4, A4-R,
and letter-R media.
3 Close the bottom door, and then close the top door.
4 The control-panel display prompts you to select the size and
type of the media that you want to use.
5 Scroll to the size that you want and select it.
6 Scroll to the type you want and select it.
Note
See “Selecting media for your document” on page 175 for more
information about selecting types of media.
1
2
3