Filter
Top Products
44 Copying multiple sized originals ENWW
Sharpness
The SHARPNESS CONTROl specifies the sharpness setting that the scanner uses when the
MFP scans your original. Sharpness enhances the edges of the original so that faint or fine
text and graphics are reproduced more sharply. Adjust the amount of sharpness by
touching the arrows on the S
HARPNESS CONTROL bar.
Copying multiple sized originals
If the original document contains mixed-size originals, for example, a letter-size document
with several legal-size charts, see “Using Job Mode” on page 41 for more information.
Setting copy defaults
The defaults for several copy settings can be controlled by the administrator. To set or
change the following copy defaults, perform the following steps:
1 Touch M
ENU.
2 Touch C
ONFIGURE DEVICE.
3 Touch C
OPYING.
4 Select the copy setting that you want to change.
Note See “Copying submenu” on page 131 for more information.
Copy setting Description
COLOR MODE Sets the MFP to default to color or black and white copies.
NUMBER OF SIDES The copy can have one side (simplex) or two sides (duplex) printed on
each page.
COLLATE If collate is OFF, each page is copied separately. If collate is ON, the
document is collated.
COPIES Indicates the number of copies that will be produced.
STAPLE SUBMENU Appears if a stapling finishing device is attached.
SHARPNESS Indicates the sharpness of the image when it is copied.
BACKGROUND REMOVAL Indicates how much background is removed when an image is copied.