Filter
Top Products
1. Safety, Operation Panel, Teach Pendant (1) Safety
------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------
1 - 30
When you use the robot system for any other or additional purpose than its designated
usage, at first, you must review whether it is valid in accordance with design criteria.
The manufacturer can not be held liable for any damage or loss which resulted from
such misuse or improper use.
The user, operator, workers shall have the full responsibility for the risks caused
by such misuse or improper use. When you use and operate the robot system for its
designated use, you must have a good command of all the information contained at
these operating instructions as well as the maintenance manual.
The robot system may not be put into operation until it is ensured that the functional
machine or plant into which the robot system has been integrated conforms to the
specifications of the EC directives 89/392 EWG dated 14 June 1989 and 91/368 EWG dated
20 June 1991.
The following harmonized standards in particular were taken into account with regard
to the safety of the robot system:
IEC 204-1,10.7
ISO 11161,3.4
ISO 10218(EN 775), 6.4.3
ISO 10218(EN 775), 3.2.17
ISO 10218(EN 775), 3.2.8
ISO 10218(EN 775), 3.2.7
User must take the full responsibility for any accident caused by his negligence
or non-observance of these instructions. When the user provides any peripheral
equipment or other equipment which are not included in the scope of supply of Hyundai
robot system, HHI will not take any liabilities and responsibilities for any damages
or losses caused by the mis-use or malfunction of the such equipments provided by
user. User must take the full liabilities and responsibilities for any risks and
damages which can take place due to the above peripheral equipments or other
equipments provided by user.