Filter
Top Products
416 Hardware Reference Manual
Intel
®
IXP2800 Network Processor
Performance Monitor Unit
11.4.6.18 ME14 Events Target ID(110100) / Design Block #(1010)
11.4.6.19 ME15 Events Target ID(110101) / Design Block #(1010)
Table 172. ME14 PMU Event List
Event
Number
Event Name
Clock
Domain
Pulse/
Level
Burst Description
Note:
1. All the Microengines have the same event list.
2. CC_Enable bit[2:0] is PMU_CTX_Monitor in Microengine CSR, This field holds the number of context to be monitored. The
event count only reflects the events that occur when this context is executing.
CC_Enable[2:0] = 000, select context number 0,
CC_Enable[2:0] = 001, select context number 1,
.......
CC_Enable[2:0] = 111, select context number 7.
3. 1.4 GHz events are sampled by the PMU at a 700 MHz rate. For this reason, all 1.4 GHz events have both an even and an odd
event. To determine the total number of 1.4 GHz events, the occurrences of the even events and odd events should be added
together.
4. For IXP2800 Network Processor Rev B, CC_Enable[3] must be set to 1 on all 16 Microengines for proper PMU functionality.
Table 173. ME15 PMU Event List
Event
Number
Event Name
Clock
Domain
Pulse/
Level
Burst Description
Note:
1. All the Microengines have the same event list.
2. CC_Enable bit[2:0] is PMU_CTX_Monitor in Microengine CSR, This field holds the number of context to be monitored. The
event count only reflects the events that occur when this context is executing.
CC_Enable[2:0] = 000, select context number 0,
CC_Enable[2:0] = 001, select context number 1,
.......
CC_Enable[2:0] = 111, select context number 7.
3. 1.4 GHz events are sampled by the PMU at a 700 MHz rate. For this reason, all 1.4 GHz events have both an even and an odd
event. To determine the total number of 1.4 GHz events, the occurrences of the even events and odd events should be added
together.
4. For IXP2800 Network Processor Rev B, CC_Enable[3] must be set to 1 on all 16 Microengines for proper PMU functionality.