Filter
Top Products
Figure 28: Named VLAN not in a Pool
6. In the List of VLAN IDs field, enter the VLAN ID you want to name. If you know the ID, enter the ID. Or,
click the drop-down list to view the IDs then click the <-- arrow to add the ID to the pool.
7. ClickApply.
In the CLI
This example assigns a name to an existing VLAN ID.
(host) (config) #vlan-name myvlan
(host) (config) #vlan myvlan 94
This example assigns a VLAN name in a virtual AP:
(host) (config) #wlan virtual-ap default vlan mygroup
This example assigns a VLAN name in a wired profile for access VLAN:
(host) (Wired AP profile "default") #switchport access vlan mygroup
This example assigns a VLAN name in a wired profile for a trunk VLAN and an allowed VLAN.
(host) (Wired AP profile "default") #switchport access vlan mygroup
(host) (config) #ap wired-ap-profile default switchport trunk ?
allowed Set allowed VLAN characteristics when interface is
in trunking mode
native Set trunking native characteristics when interface
is in trunking mode
(host) (config) #ap wired-ap-profile default switchport trunk native vlan mynativevlan
(host) (config) #ap wired-ap-profile default switchport trunk allowed vlan myallowedvlan
Creating a VLAN Pool
You can create, update and delete a VLAN pool. Each VLAN pool has a name and needs to have one or more
VLANs assigned to it. The following configurations create a VLAN Pool named mygroup, it has the assignment type
Even, and VLAN IDs 2, 4 and 12 are to this pool.
Using the WebUI
1. Navigate to Configuration > Network > VLANs.
2. Select the VLAN Pool tab to open the VLAN Pool window.
3. Click Add.
4. In the VLAN Name field, enter a name that identifies this VLAN pool.
DellPowerConnectW-SeriesArubaOS6.2 | User Guide NetworkConfigurationParameters | 110