Filter
Top Products
800 | RF Plan DellPowerConnectW-SeriesArubaOS6.2 | User Guide
Figure 369: Plan>New Building>AP Modeling Parameters Window
This window allows you to select or control the parameters as defined in Table 370.
Parameter Description
Radio Type Use this drop-down menu to specify the radio type. See "Radio Type" on page 800
AP Type Dell Alcatel AP device. Use the drop-down menu to select the device type. The supported APs
listed in the drop-down menu are dependent on the selected radio type.
Design Model Use the Coverage, Capacity, and Custom radio buttons to specify a design model to use in the
placement of APs. See"Design Model" on page 801
Overlap Factor Use this field and drop-down to specify an overlap factor. See"Overlap Factor" on page 801.
Users Use this field to specify the number of users on your WLAN. See "Users/AP" on page 802.
Radio Properties
(Desired Rates and HT
Support Options)
Use this drop-down to define 802.11a, 802.11b/g, and 802.11n settings for the 5 GHz and 2.4 GHz
frequency bands, including high-throughput, data rates, and 40 Mhz channel spacing
See "Radio Properties (Desired Rates and HT Support Options)" on page 802.
APs Use this field to enter the fixed number of APs to be used in this building’s network (Custom model
only).
Table 370:
AP Modeling Parameters
Radio Type
Use the drop-down radio type menu to specify radio type of your AP. The available types are defined in Table 371.
Parameter Description
801.11a/b/g Simultaneous use of 802.11b/g and 802.11a.
802.11b/g 2.4 GHz, Direct Spread Spectrum (DSSS) multiplexing with data rates up to 11 Mbps, combined with
Orthogonal Frequency Division Multiplexing/Complementary Code Keying (OFDM/CCK) with data rates up
to 54 Mbps.
Table 371:
Radio Type Definitions