Filter
Top Products
519 | Remote AccessPoints DellPowerConnectW-SeriesArubaOS6.2 | User Guide
Summary Table
Name
Basic View Information Advanced View Information
Wired Ports Status l Port: Port numbers of the wired ports on the
AP.
l Status: Current status of each port
(
Connected
,
LinkDown
or
Disabled
).
The advanced view of the Wired Access Ports
table displays the following data:
l Port: Port numbers of the wired ports on the
AP.
l Status: Current status of each port (
Connected
,
LinkDown
or
Disabled
).
l MAC Address: MAC address of the wired port.
l Speed: Speed of the link.
l Duplex Type: Duplex mode of the link, full or
half.
l Forwarding mode: Forwarding mode for the
port:
Bridge
,
Tunnel
or
Split Tunnel
.
l Users: Number of users accessing each port.
l Rx Packets: Number of packets received on the
port.
l Tx packets: Number of packets transmitted via
the port.
Wireless SSIDs l SSID: Name of the SSID.
l Status: SSID Status (up, down, or disabled).
l Band: Radio band available on the SSID.
l SSID: Name of the SSID.
l Status: SSID Status (up, down, or disabled).
l Band: Radio band available on the SSID.
l Channel: Channel used on the radio band.
l BSSID: BSSID of the wireless SSID.
l Forwarding Mode: Forwarding mode used by
the Wireless SSID (Bridge, Tunnel or Split-
Tunnel).
l EIRP: Equivalent Isotropic Radiated Power, in
dBm.
l Noise floor: The residual background noise
detected by an AP. Noise seen by an AP is
reported as -dBm. Therefore, a noise floor of -
100 dBm is smaller (lower) than a noise floor of
-50 dBm.
l Users: Number of users on the radio band.
l Rx Packets: Number of packets received on the
BSSID.
l Tx packets: Number of packets transmitted via
the BSSID.
Wired Users l MAC Address: MAC address of the wired
user.
l IP address: IP address of the wired user.
l MAC Address: MAC address of the wired user.
l IP address: IP address of the wired user.
l Port: AP port used by the wired user.
Wireless User l MAC Address: MAC address of the wireless
user.
l IP address: IP address of the wireless user.
l MAC Address: MAC address of the wired user.
l IP address: IP address of the wired user.
l SSID: Name of the SSID.
l BSSID: BSSID of the wireless user.
l Assoc State: Shows if the user is associated or
just authorized.
l Auth: Type of authentication: WPA, 802.1x,
none, open, or shared.
l Encryption: Encryption type used by the
wireless user.
Table 168:
RAP Console Summary Tab Information