Filter
Top Products
313 | Rolesand Policies DellPowerConnectW-SeriesArubaOS6.2 | User Guide
Parameter Description
table Default: Disabled
Session mirror IPSEC Configures session mirroring of all frames that are processed by IPsec. Frames are
sent to IP address specified by the session-mirror-destination option.
NOTE: Use this option for debugging or troubleshooting only.
Default: Disabled
Session-tunnel FIB
Enable session,tunnel based forwarding.
WARNING: WARNING: Best practices is to enable this parameter only during
maintenance window or off-peak production hours.
Multicast automatic shaping Enables multicast optimization and provides excellent streaming quality regardless of
the amount of VLANs or IP IGMP groups that are used.
Default: Disabled
Stateful VOCERA Processing Disables stateful VOCERA processing.
Default: Disabled
Stateful UA Processing Disables stateful UA processing.
Default: Disabled
Enforce bw contracts for broadcast
traffic
Applies bw contracts to local subnet broadcast traffic.
Enforce TCP Sequence numbers Enforces the TCP sequence numbers for all packets.
Default:Disabled
Enforce WMM Voice Priority
Matches Flow Content
If traffic to or from the user is inconsistent with the associated QoS policy for voice,
the traffic is reclassified to best effort and data path counters incremented.
Default: Disabled
Rate limit CP untrusted ucast traffic
(Mbps)
Specifies the untrusted unicast traffic rate limit. Range is 1-200 Mbps.
Default: 10 Mbps
Rate limit CP untrusted mcast traffic
(Mbps)
Specifies the untrusted multicast traffic rate limit. Range is 1-200 Mbps.
Default: 2 Mbps
Rate limit CP trusted ucast traffic
(Mbps)
Specifies the trusted unicast traffic rate limit. Range is 1-200 Mbps.
Default: 80 Mbps
Rate limit CP trusted mcast traffic
(Mbps)
Specifies the trusted multicast traffic rate limit. Range is 1-200 Mbps.
Default: 2 Mbps
Rate limit CP route traffic (Mbps) Specifies the traffic rate limit that needs ARP requests. Range is 1-200 Mbps.
Default: 1 Mbps
Rate limit CP session mirror traffic
(Mbps)
Specifies the session mirrored traffic forwarded to the controller. Range is 1-200
Mbps.
Default: 1 Mbps
Rate limit CP auth process traffic
(Mbps)
Specifies the traffic rate limit that is forwarded to the authentication process. Range
is 1-200 Mbps.
Default: 1 Mbps