Filter
Top Products
c. (Optional)If you are not configuring ARM for a mesh node, select honor 40 MHz intolerance to allow a
radio using this profile to stop using the 40 MHz channels if the 40 MHz intolerance indication is received
from another AP or station. This option is enabled by default.
5. Click Apply to save your settings.
The ARM profile name appears in the Profile list with your configured settings. If you configured this profile for the
AP group, this ARM profile becomes part of the selected 802.11a or 802.11g RF management profile used by the
mesh portal for your mesh network.
Deleting a Profile
You can delete an 802.11a or 802.11g radio profile only if no APs or AP groups are associated with that profile. To
delete a 802.11a or 802.11g radio profile using the WebUI.
1. Navigate to the Configuration > Advanced Services> All Profiles window.
2. Expand the RF Management menu, then select 802.11a radio profile or 802.11g radio profile. A list of profiles
of the specified type appears in the Profile Details window pane.
3. Click the Delete button by the name of the profile you want to delete.
Managing 802.11a/802.11g Profiles Using the CLI
You must be in config mode to create, modify or delete a 802.11a or 802.11g RF management radio profile using
the CLI. Specify an existing mesh profile with the <profile-name> parameter to modify an existing profile, or enter
a new name to create an entirely new profile.
Creating or Modifying a Profile
Configuration details and any default values for each of these parameters are described in Table 122. This CLI
command also allows you to reference an ARM profile and high-throughput radio profile for the 802.11a or 802.11g
radio. If you do not specify a parameter for a new profile, that profile uses the default value for that parameter. Put
the no option before any parameter to remove the current value for that parameter and return it to its default
setting. Enter exit to leave the 802.11a or 802.11g profile mode.
rf dot11a-radio-profile|dot11g-radio-profile <profile-name>
am-scan-profile
arm-profile
beacon-period
beacon-regulate
cap-reg-eirp
channel <num|num+|num->
channel-reuse
channel-reuse-threshold
clone
csa
csa-count
disable-arm-wids-function
dot11b-protection (for 802.11g radio profiles only)
dot11h
high-throughput-enable
ht-radio-profile
interference-immunity
maximum-distance
mgmt-frame-throttle-interval
mgmt-frame-throttle-limit
mode {ap-mode|am-mode|spectrum-mode}
no
radio-enable
slb-mode
DellPowerConnectW-SeriesArubaOS6.2 | User Guide AccessPoints(APs) | 431