Filter
Top Products
547 | Remote AccessPoints DellPowerConnectW-SeriesArubaOS6.2 | User Guide
5. Click Convert Now to complete the conversion.
Enabling Bandwidth Contract Support for RAPs
This release of ArubaOS provides Bandwidth Contract support on remote APs. This is achieved by extending the
Bandwidth Contract support on split-tunnel and bridge modes.
You can apply Bandwidth Contract for a RAP on a per-user or per-role basis. By default, Bandwidth Contract is
applied on a per-role basis. This implies that all the users belonging to the same role will share the bandwidth pool.
When Bandwidth Contract configured on the controller is attached to a user-role, it automatically gets pushed to
the RAPs terminating on it.
The following show commands have been enhanced in this release to retrieve the Bandwidth Contract information
from the RAP:
show datapath user ap-name <ap-name>
show datapath bwm ap-name <ap-name>
NOTE: Bandwidth Contract is not supported on legacy APs such as AP6x, AP70 and RAP-2 due to memory constrains.
Configuring Bandwidth Contracts for RAP
You can configure bandwidth contracts for RAP on a per-role or per-user basis. The following examples illustrate how
to configure, apply, and verify the Bandwidth Contracts on the RAPs.
Defining Bandwidth Contracts
Use the following command to define a 256 Kbps contract:
(host) (config) #aaa bandwidth-contract 256k kbits 256
Use the following command to define a 512 Kbps contract
(host) (config) #aaa bandwidth-contract 512k kbits 512
Applying Contracts
You can apply the contract on a per-role or per-user basis.
Applying Contracts Per-Role
Use the following commands to apply the contracts on a per-role basis for upstream and downstream:
For upstream contract of 512 Kbps:
(host) (config) #user-role authenticated bw-contract 512k upstream
For downstream contract of 256 Kbps:
(host) (config) #user-role authenticated bw-contract 256k downstream
Applying Contracts Per-User
Use the following commands to apply the contracts on a per-user basis for upstream and downstream:
For upstream contract of 512 Kbps:
(host) (config) #user-role authenticated bw-contract 512k per-user upstream
For downstream contract of 256 Kbps:
(host) (config) #user-role authenticated bw-contract 256k per-user downstream