Filter
Top Products
DTIM Interval 1 beacon periods
802.11a Basic Rates 6 12 24
...
...
...
EDCA Parameters Station profile N/A
EDCA Parameters AP profile N/A
BC/MC Rate Optimization Enabled
Strict Spectralink Voice Protocol (SVP) Disabled
...
...
...
7. Configure ARM scanning for video traffic.
In the default RF ARM profile, enable the video aware scan option. This prevents APs from scanning when a
video traffic is active.
(host) (config) #rf arm-profile default
(host) (Adaptive Radio Management (ARM) profile "default") #video-aware-scan
(host) (Adaptive Radio Management (ARM) profile "default") #end
(host) #show rf arm-profile default
Adaptive Radio Management (ARM) profile "default"
-------------------------------------------------
Parameter Value
--------- -----
Assignment single-band
Allowed bands for 40MHz channels a-only
Client Aware Enabled
...
...
...
Scanning Enabled
Scan Time 110 msec
VoIP Aware Scan Disabled
Power Save Aware Scan Enabled
Video Aware Scan Enabled
...
...
...
Load aware Scan Threshold 1250000 Bps
Mode Aware Arm Disabled
8. Configure and apply a bandwidth management profile.
(host) (config)# wlan wmm-traffic-management-profile default
NOTE: Ensure that you configure the WMM traffic management profile to the virtual AP profile if you have configured the virtual AP
traffic management profile.
a. Enable a bandwidth shaping policy so that the allocated bandwidth share is appropriately used.
(host) (WMM Traffic management profile "default") # enable-shaping
b. Set a bandwidth percentage for the following categories:
(host) (WMM Traffic management profile "default") # background 10
(host) (WMM Traffic management profile "default") # best-effort 20
(host) (WMM Traffic management profile "default") # video 50
(host) (WMM Traffic management profile "default") # voice 20
(host) (WMM Traffic management profile "default") # show wlan wmm-traffic-management-
profile default
DellPowerConnectW-SeriesArubaOS6.2 | User Guide Voiceand Video | 690