Filter
Top Products
The following attributes are sent in Accounting-Request packets when Acct-Status-Type value is Start:
l Acct-Status-Type
l User-Name
l NAS-IP-Address
l NAS-Port
l NAS-Port-Type
l NAS-Identifier
l Framed-IP-Address
l Calling-Station-ID
l Called-station-ID
l Acct-Session-Id
l Acct-Authentic
The following attributes are sent in Accounting-Request packets when Acct-Status-Type value is Stop:
l Acct-Status-Type
l User-Name
l NAS-IP-Address
l NAS-Port
l NAS-Port-Type
l NAS-Identifier
l Framed-IP-Address
l Calling-Station-ID
l Called-station-ID
l Acct-Session-Id
l Acct-Authentic
l Terminate-Cause
l Acct-Session-Time
The following attributes are sent only in Accounting Stop packets (they are not sent in Accounting Start packets):
l Acct-Input-Octets
l Acct-Output-Octets
l Acct-Input-Packets
l Acct-Output-Packets
Remote APs in split-tunnel mode now support RADIUS accounting. If you enable RADIUS accounting in a split-
tunnel Remote AP’s AAA profile, the controller sends a RADIUS accounting start record to the RADIUS server
when a user associates with the remote AP, and sends a stop record when the user logs out or is deleted from the
user database. If interim accounting is enabled, the controller sends updates at regular intervals. Each interim record
includes cumulative user statistics, including received bytes and packets counters.
You can use either the WebUI or CLI to assign a server group for RADIUS accounting.
Using the WebUI
1. Navigate to the Configuration > Security > Authentication > AAA Profiles page.
2. Select AAA Profile, then select the AAA profile instance.
DellPowerConnectW-SeriesArubaOS6.2 | User Guide Authentication Servers | 186