Filter
Top Products
Configuration Option Description
to the support email-address for troubleshooting.
Default: Enabled
Enable IKEv2 Select this option to enable or disable the use of IKEv2 policies for VIA.
Use Suite B Cryptography Select this option to use Suite B cryptography methods. You must install the Advanced
Cryptography license to use the Suite B cryptography. See "Working with Licenses" on
page 101 for more information.
IKEv2 Authentication method List of all IKEv2 authentication methods.
VIA Client DNS Suffix List The DNS suffix list (comma separated) that has be set on the client once the VPN connection
is established.
Default: None.
VIA Support E-mail Address The support e-mail address to which VIA users will send client logs.
Default: None.
Advanced VIA Connection Profile Settings
VIA Servers
Enter the following information about the VIA controller.
l Hostname/IP Address: This is the public IP address or the DNS hostname of your VIA
Server / controller. Users will connect to this remote server using the IP address or the
hostname.
l Internal IP Address: This is the IP address of any of the VLAN interface IP addresses
belonging to this VIA server.
l Description: This is a human-readable description of the VIA server. Click the Add
button after you have entered all the details.
If you have more than one VIA controller you re-order them by clicking the Up and Down
arrows. To delete a VIA server from your list, select a server and click Delete.
Client Auto-Login Select this checkbox to allow a VIA client to automatically log in and establish a secure con-
nection to the controller. Default: Enabled
VIA Authentication Profiles to
provision
This is the list of VIA authentication profiles that will be displayed to users in the VIA client.
See "Create VIA Connection Profile" on page 557
l Select an authentication profile and click the Add button to add to the authentication
profiles list.
l You can change the order of the list by clicking the
Up
and
Down
arrows.
l To delete an authentication profile, select a profile name and click the Delete button.
Allow client to auto-upgrade Enable or disable VIA client to automatically upgrade when an updated version of the client
is available on the controller.
Default: Enabled
VIA tunneled networks A list of network destination (IP address and netmask) that the VIA client will tunnel through
the controller. All other network destinations will be reachable directly by the VIA client.
Enter an IP address and network mask, then click
Add
button to add them to the tunneled net-
works list. To delete a network entry, select the IP address and click
Delete
.
Enable split-tunneling Enable or disable split tunneling. If enabled, all traffic to the VIA tunneled networks ) will go
through the controller and the rest is just bridged directly on the client. If disabled, all traffic
will flow through the controller. Default: off
VIA Client WLAN profiles A list of VIA client WLAN profiles that needs to be pushed to the client machines that use
DellPowerConnectW-SeriesArubaOS6.2 | User Guide VirtualIntranet Access | 559