Filter
Top Products
560 | VirtualIntranet Access DellPowerConnectW-SeriesArubaOS6.2 | User Guide
Configuration Option Description
Windows Zero Config (WZC) to configure or manage their wireless networks.
l Select a WLAN profile and click the Add button to add to the client WLAN profiles list.
l To delete an entry, select the profile name and click the Delete button.
See "Configure VIA Client WLAN Profiles" on page 562 for more information.
VIA IKE V2 Policy List of available IKEv2 policies.
VIA IKE Policy List of IKE policies that the VIA Client has to use to connect to the controller. These IKE
policies are configured under Configuration > Advanced Services > VPN Services > IPSEC >
IKE Policies.
Use Windows Credentials Enable or disable the use of the Windows credentials to login to VIA. If enabled, the SSO
(Single Sign-on) feature can be utilized by remote users to connect to internal resources.
Default: Enabled
VIA IPSec V2 Crypto Map List of all IPSec V2 that the VIA client uses to connect to the controller.
VIA IPSec Crypto Map List of IPSec Crypto Map that the VIA client uses to connect to the controller. These IPSec
Crypto Maps are configured in CLI using the crypto-local ipsec-map <ipsec-
map-name> command.
VIA Client Network Mask The network mask that has to be set on the client after the VPN connection is established.
Default: 255.255.255.255
Enable Supplicant If enabled, VIA starts in bSec mode using L2 suite-b cryptography. This option is disabled by
default.
Enable FIPS Module Enable the VIA(Federal Information Processing Standard) FIPS module so VIA checks for
FIPS compliance during startup. This option is disabled by default.
Auto-Launch Supplicant Select this option to automatically connect to a configured WLAN network.
Lockdown all Settings If enabled, all user options on the VIA client are disabled.
Domain Suffix in
VIAAuthentication
Enables a domain suffix on VIA Authentication, so client credentials are sent as domain-
name\username instead of just username..
Enable Controllers Load Bal-
ance
Enable this option to allow the VIA client to failover to the next available selected randomly
from the list as configured in the VIA Servers option. If disabled, VIA will failover to the next
in the sequence of ordered list of VIA Servers.
Enable Domain Preconnect Enable this option to allow users with lost or expired passwords to establish a VIA con-
nection to corporate network. This option authenticates the user’s device and establishes a
VIA connection that allows users to reset credentials and continue with corporate access.
VIA Banner Message Reap-
pearance Timeout(minutes)
The maximum time (minutes) allowed before the VIA login banner reappears. Default: 1440
min
VIA Client Network Mask VIA client network mask, in dotted decimal format.
Validate Server Certificate Enable or disable VIA from validating the server certificate presented by the controller.
Default: Enabled
VIA max session timeout The maximum time (minutes) allowed before the VIA session is disconnected.
Default: 1440 min