Filter
Top Products
Figure 100: WIP Wizard’s Intrusion Detection
Understanding Wizard Intrusion Protection
Apply the intrusion protection mechanisms for your infrastructure and clients (see Figure 101). You can set the
protection level to automatically enable the appropriate protection mechanisms or customize the settings for your
infrastructure and clients.
Protecting Your Infrastructure
Use the slider to select one of the protection levels for the infrastructure:
l High—Enables all the protection mechanisms applicable to your infrastructure including all the options of low
and medium level settings.
l Medium—Enables some important protection mechanisms for your infrastructure including all the options of the
low level settings.
l Low—Enables only the most critical protection mechanisms for your infrastructure.
l Off (Default)—Disables all the protection mechanisms.
To enable custom settings, click the
Allow custom settings
link. You can manually enable or disable the protection
mechanisms for your infrastructure. To revert to the standard settings from custom settings mode, click the
Revert to
standard settings
link.
Protecting Your Clients
Use the slider (see Figure 101) to select one of the following preset protection levels for your clients:
l High—Enables all the protection mechanisms applicable to your clients including all the options of the low level
settings.
l Low—Enables only the most critical protection mechanisms for your clients.
l Off (Default)—Disables all the protection mechanisms.
To enable custom settings, click the
Allow custom settings
link to manually enable or disable the protection
mechanisms for your clients. To revert to the standard settings from custom settings mode, click the
Revert to
standard settings
link.
DellPowerConnectW-SeriesArubaOS6.2 | User Guide WirelessIntrusion Prevention | 366