Filter
Top Products
213 | 802.1XAuthentication DellPowerConnectW-SeriesArubaOS6.2 | User Guide
3. In the Profiles list, select Wireless LAN, then select Virtual AP.
4. To configure the WLAN-01_first-floor virtual AP:
a. Select NEW from the Add a profile drop-down menu. Enter WLAN-01_first-floor, and click Add.
b. In the Profile Details entry for the WLAN-01_first-floor virtual AP profile, select the aaa_dot1x AAA profile
you previously configured. A pop-up window displays the configured AAA profile parameters. Click Apply in
the pop-up window.
c. From the SSID profile drop-down menu, select NEW. A pop-up window allows you to configure the SSID
profile.
d. Enter WLAN-01 for the name of the SSID profile.
e. For Network Name, enter WLAN-01.
f. For Network Authentication, select WPA.
g. Click Apply in the pop-up window.
h. At the bottom of the Profile Details page, click Apply.
5. Click on the WLAN-01_first-floor virtual AP name in the Profiles list or in Profile Details to display
configuration parameters.
a. Make sure Virtual AP enable is selected.
b. For VLAN, select 60.
c. Click Apply.
6. Navigate to the Configuration > Wireless > AP Configuration page.
7. In the AP Group list, click Edit for the second-floor.
8. In the Profiles list, select Wireless LAN, then select Virtual AP.
9. To configure the WLAN-01_second-floor virtual AP:
a. Select NEW from the Add a profile drop-down menu. Enter WLAN-second-floor, and click Add.
b. In the Profile Details entry for the virtual AP profile, select aaa_dot1x from the AAA profile drop-down menu.
A pop-up window displays the configured AAA profile parameters. Click Apply in the pop-up window.
c. From the SSID profile drop-down menu, select WLAN-01. A pop-up window displays the configured SSID
profile parameters. Click Apply in the pop-up window.
d. At the bottom of the Profile Details page, click Apply.
10. Click on the new virtual AP name in the Profiles list or in Profile Details to display configuration parameters.
a. Make sure Virtual AP enable is selected.
b. For VLAN, select 61.
c. Click Apply.
In the CLI
(host)(config) #wlan ssid-profile WLAN-01
essid WLAN-01
opmode wpa-tkip
(host)(config) #wlan virtual-ap WLAN-01_first-floor
vlan 60
aaa-profile aaa_dot1x
ssid-profile WLAN-01
(host)(config) #wlan virtual-ap WLAN-01_second-floor
vlan 61
aaa-profile aaa_dot1x
ssid-profile WLAN-01