Filter
Top Products
432 | AccessPoints(APs) DellPowerConnectW-SeriesArubaOS6.2 | User Guide
slb-threshold
slb-update-interval
spectrum-load-bal-domain
spectrum-load-balancing
spectrum-monitoring
spectrum-profile
tpc-power
tx-power
You can also create a new 802.11a or 802.11g RF management profile by copying the settings of an existing profile
using the clone parameter. Using the clone command to create a new profile makes it easier to keep constant
attributes in common within multiple profiles.
rf dot11a-radio-profile <profile-name> clone <source-profile-name>
rf dot11g-radio-profile <profile-name>clone <source-profile-name>
Viewing RF Management Settings
To view a complete list of 802.11a or 802.11g RF management profiles and their status:
show rf dot11a-radio-profile|dot11g-radio-profile
To view the settings of a specific RF management profile:
show rf dot11a-radio-profile|dot11g-radio-profile <profile-name>
Assigning a 802.11a/802.11g Profile
To assign an 802.11a or 802.11g RF management profile to an AP group:
ap-group <group> dot11a-radio-profile <profile-name>
-or-
ap-group <group> dot11g-radio-profile <profile-name>
To assign an 802.11a or 802.11g RF management profile to an individual AP:
ap-name <name> dot11a-radio-profile <profile-name>
-or-
ap-name <name> dot11g-radio-profile <profile-name>
Deleting a Profile
If no AP or AP group is using an RF management profile, you can delete that profile using the no parameter:
no rf dot11a-radio-profile <profile-name>
RF Optimization
Each AP includes an RF Optimization profile that allows you to configure settings for detecting interference. The
controller can detect interference near a wireless client station or AP is based on an increase in the frame retry rate or
frame receive error rate.
Using the WebUI
1. Navigate to the Configuration > Wireless > AP Configuration window. Select either the AP Group or AP
Specific tab.
l If you selected the AP Group tab, click the Edit button by the AP group name for which you want to
configure the RF Optimization profile.
l If you selected the AP Specific tab, click the Edit button by the AP for which you want to create the RF
Optimization profile.
2. Expand the RF Management menu, then expand the RF Optimization Profile menu.