Filter
Top Products
measure-duration <measure-duration>
measure-mode active-all-ch|active-ch-rpt|beacon-table|passive
no...
random-interval <random-interval>
reg-class 1|12
request-info <requestinfo>
rpt-condition <rpt-condition>
rpt-detail
ssid <ssid>
Working with a Traffic Stream Measurement Report
The Traffic Stream Measurement(TSM) report requests are sent only to dot11k compliant clients that advertise a
traffic stream report capability. The TSM report request frames are sent every 60 seconds. The content of the report
requests can be defined in the TSMReport Request profile using the WebUI or CLI. To select the information to
be sent in TSM report reqeusts using the WebUI:
1. Navigate to Configuration > Advanced Services > All Profile Management.
2. Expand the Wireless LAN menu and select TSM Report Request.
3. Select the TSMReport Request profile you want to configure.
4. Define the settings described in the table below, then click Apply Changes to save your settings.
Table 93:
TSM Report Request Settings
Parameter Description
Request Mode for TSM Report Request
Select one of the following request modes:
l normal
l triggered
This value is used to determine the request mode for the Transmit
Stream/Category Measurement Request frame. A Transmit Stream/Cat-
egory Measurement Request frame can be sent in either "normal" mode or
"triggered" mode. There are two options for this field - "normal" and "trig-
gered". When the "triggered" option is selected, the
Transmit Stream/Category Measurement Request frame is sent only when
the trigger condition occurs. The default value for this field is "normal".
Number of repetitions
This value is used to set the "Number of Repetitions" field in the Transmit
Stream/Category Measurement Request frame. The Number of Repetitions
field contains the requested number of repetitions for all the Measurement
Request elements in this frame. A value of zero in this field indicates Meas-
urement Request elements are executed once without repetition. A value
of 65535 in the Number of Repetitions field indicates Measurement
Request elements are repeated until the measurement is cancelled or
superseded. This field has values in the range (0, 65535). The default value
is 65535.
Duration Mandatory This value is used to set the "Duration Mandatory" bit of the Measurement
Request Mode field of the Transmit Stream/Category Measurement
Request frame. The default value is "enabled".
Randomization Interval This value is used to set the Randomization Interval field in the Transmit
Stream/Category Measurement Request frame. The Randomization Inter-
val is used to specify the desired maximum random delay in the meas-
urement start time. It is expressed in units of TUs (Time Units). When the
request mode for the Transmit Stream/Category Measurement Request
DellPowerConnectW-SeriesArubaOS6.2 | User Guide VirtualAPs | 339