Filter
Top Products
414 | AccessPoints(APs) DellPowerConnectW-SeriesArubaOS6.2 | User Guide
Parameter Description
PPPOE Password : Point-to-Point Protocol over Ethernet (PPPoE) password for the AP.
PPPOE Service Name Configures the PPPoE service name for the AP.
USB User Name Configures the PPPoE username for the AP.
USB Password : A PPP password, if provided by the cellular service provider.
USB Device Type The USB device type.
USB Device Identifier The USB device identifier.
USB Dial String The dial string for the USB modem. This parameter only needs to be specified if the
default string is not correct.
USB Initialization String The initialization string for the USB modem. This parameter only needs to be
specified if the default string is not correct.
USB TTY device data path The TTY device path for the USB modem. This parameter only needs to be specified if
the default path is not correct.
USB TTY device control path The TTY device control path for the USB modem. This parameter only needs to be
specified if the default path is not correct.
Link Priority Ethernet Set the priority of the wired uplink. Each uplink type has an associated priority; wired
ports having the highest priority by default.
Link Priority Cellular Set the priority of the cellular uplink. By default, the cellular uplink is a lower priority
than the wired uplink; making the wired link the primary link and the cellular link the
secondary or backup link.
Configuring the cellular link with a higher priority than your wired link priority will set
your cellular link as the primary controller link.
Username of AP so that AP can
authenticate to 802.1x using PEAP
Configure the AP username.
Password of AP so that AP can
authenticate to 802.1x using PEAP
Configure the AP password.
Uplink VLAN If you configure an uplink VLAN on an AP connected to a port in trunk mode, the AP
sends and receives frames tagged with this VLAN on its Ethernet uplink.
By default, an AP has an uplink vlan of 0, which disables this feature.
If an AP is provisioned with an uplink VLAN, it must be connected to a trunk mode
port or the AP’s frames will be dropped. 0 ( disabled) to 4095 0
Assigning Provisioning Profiles
Once you have defined a provisioning profile, you must assign that profile to an AP group.
1. Navigate to the Configuration>AP configuration window and select the AP group tab.
2. Click the Edit button by the name of the AP group to which you want to assign the provisioning profile.
3. In the profiles list, expand the AP menu, and select Provisioning Profile. The Profile Details window appears.
4. Click the Provisioning Profile drop-down list and select the name of the provisioning profile you want to assign
to this AP group.
5. Click Apply.