Filter
Top Products
Figure 203: Active Devices Graph
Click the down arrow in the upper right corner of this chart then click the Options menu to access the configuration
settings for the Active Devices graph. Once you have configured the desired parameters, click OK at the bottom of
the Options menu to save your settings and return to the spectrum dashboards.
Parameter Description
Band Radio band displayed in this graph (2.4 GHz or 5 GHz)
Channel numbering This parameter is not configurable for graphs created by hybrid APs or spectrum monitor radios
that use the 2.4 GHz radio band. A hybrid AP on a 20 MHz channel sees 40 MHz Wi-Fi data as non-
Wi-Fi data. For spectrum monitors using the 5 GHz radio band, select either
20 MHz
or
40 MHz
chan-
nel numbering to identify a channel numbering scheme for the graph.
Channel Range For graphs created by spectrum monitors, specify a channel range to determine which channels
appears in this graph. Click the first drop-down list to select the lowest channel in the range, then
click the second drop-down list to select the highest channel to appear in the graph.
By default, this graph displays all channels within the spectrum monitor’s radio band.
NOTE: This parameter is not configurable for graphs created by hybrid APs.
Show Click the checkbox by any of these device categories to include that device type in the graph.
l WiFi (AP)
l Microwave
(This option is only available for 2.4 GHz radios)
l Bluetooth
(This option is only available for 2.4 GHz radios)
l Fixed Freq (Others)
l Fixed Freq (Cordless Phones)
l Fixed Freq (Video)
l Fixed Freq (Audio)
l Freq Hopper (Others)
l Freq Hopper (Cordless Network)
l Freq Hopper (Cordless Base)
l Freq Hopper Xbox
(This option is only available for 2.4 GHz radios)
l Microwave (Inverter)
(This option is only available for 2.4 GHz radios)
l Generic Interferer
NOTE: For more information on non-Wi-Fi device types detected by a spectrum monitor, see
"Working with Non-Wi-Fi Interferers " on page 606.
Table 204:
Active Devices Graph Options
DellPowerConnectW-SeriesArubaOS6.2 | User Guide Spectrum Analysis | 584