Filter
Top Products
719 | VoiceandVideo DellPowerConnectW-SeriesArubaOS6.2 | User Guide
Parameter Description
this application type if both the same network policies apply to both video and
video signaling traffic.
l voice: Select this application type if the AP services IP telephones and other
appliances that support interactive voice services. This is the default application
type.
l voice-signaling: Select this application type if the AP is part of a network that
requires a different policy for voice signaling than for the voice media. Do not use
this application type if both the same network policies apply to both voice and
voice signaling traffic.
LLDP-MED application VLAN Specify a VLAN by VLAN ID (0-4094) or VLAN name.
LLDP-MED application VLAN
tagging
Click this checkbox if the LLDP-MED policy applies to a to a VLAN that is tagged with
a VLAN ID or untagged. The default value is untagged.
NOTE: When an LLDP-MED network policy is defined for use with an untagged VLAN,
then the L2 priority field is ignored and only the DSCP value is used.
Advanced Settings
LLDP-MED application Layer-2
priority
Specify a 802.1p priority level for the specified application type, by entering a value
from 0-7, where 0 is the lowest priority level and 7 is the highest priority.
LLDP-MED application
Differentiated Services Code Point
Select a Differentiated Services Code Point (DSCP) priority value for the specified
application type by specifying a value from 0-63, where 0 is the lowest priority level
and 63 is the highest priority.
13. Apply to save your settings.
In the CLI
ap lldp profile <profile>
clone <profile>
dot1-tlvs port-vlan|vlan-name
dot3-tlvs link-aggregation|mac|mfs|power
lldp-med-network-policy-profile <profile>
lldp-med-tlvs capabilities|inventory|network-policy
no ...
optional-tlvs capabilities|management-address|port-description|system-description|system-
name
receive
transmit
transmit-hold <transmit-hold>
transmit-interval <transmit-interval>
ap lldp med-network-policy-profile <profile>
application-type guest-voice|guest-voice-signaling|softphone-voice|streaming-video|video-
conferencing|video-signaling|voice|voice-signaling
clone <profile>
dscp <dscp>
l2-priority <l2-priority>
no ...
tagged
vlan <vlan>
The following commands create a LLDP MED network policy profile for streaming video applications and marks
streaming video as high-priority traffic.
(host) (config) ap lldp med-network-policy-profile vid-stream
(host) (AP LLDP-MED Network Policy Profile "vid-stream") dscp 48
(host) (AP LLDP-MED Network Policy Profile "vid-stream")l2-priority 6