Filter
Top Products
336 | VirtualAPs DellPowerConnectW-SeriesArubaOS6.2 | User Guide
bcn-rpt-req-profile Beacon Report Request Settings
clone Copy data from another 802.11K Profile
dot11k-enable Enable 802.11K Capability
force-disassoc Force disassociation of on-hook voice clients when either PCT limit
or CHR limit is reached.
handover-trigger-prof.. Handover Trigger Feature Settings
lm-req-time Set time duration between consecutive Link Measurement Requests.
Range: 10-200 sec, Default: 60sec, Turn-Off: 0
no Delete Command
rrm-ie-profile RRM IE Settings Profile
tsm-req-profile TSM Report Request Settings
tsm-req-time Set time duration between consecutive Transmit Stream Measurement
Requests. Range: 10-200 sec,Default: 90 sec, Turn-Off:0 0
Working with Radio Resource Management Information Elements
ArubaOS supports the following radio resource management information elements (RRM IEs) for APs with 802.11k
support enabled. These settings can be enabled through the WebUI or CLI.
To select the RRM IEs to be sent in beacons and probe responses using the WebUI:
1. Navigate to Configuration>Advanced Services>All Profile Management.
2. Expand the Wireless LAN menu and select RRM IE.
3. Select the RRM IE profile you want to configure, then select any of the following IE types to enable that
information element in beacons and probe responses. (All IE types are sent by default.)
Parameter Description
Advertise Enabled Capabilities IE This value is used to determine if the RRM Enabled Capabilities IE should be
advertised in the beacon frames. A value of "Enabled" allows the RRM Enabled
Capabilities IE to be present in the beacon frames when 802.11K capability is
enabled. A value of "Disabled" prevents the advertisement of the RRM Enabled
Capabilities IE in the beacon frames when 802.11K capability is enabled.
Advertise Country IE This value is used to determine if the Country IE should be advertised in the
beacon frames. A value of "Enabled" allows the Country IE to be present in the
beacon frames when 802.11K capability is enabled. A value of "Disabled" prevents
the advertisement of the Country IE in the beacon frames when 802.11K capability
is enabled.
Advertise Power Constraint IE This value is used to determine if the Power Constraint IE should be advertised in
the beacon frames. A value of "Enabled" allows the Power Constraint IE to be
present in the beacon frames when 802.11K capability is enabled. A value of
"Disabled" prevents the advertisement of the Power Constraint IE in the beacon
frames when 802.11K capability is enabled.
Advertise TPC Report IE This value is used to determine if the TPC Report IE should be advertised in the
beacon frames. A value of "Enabled" allows the TPC Report IE to be present in the
beacon frames when 802.11K capability is enabled. A value of "Disabled" prevents
the advertisement of the TPC Report IE in the beacon frames when 802.11K
capability is enabled.
Advertise QBSS Load IE This value is used to determine if the QBSS Load IE should be advertised in the
beacon frames. A value of "Enabled" allows the QBSS Load IE to be present in the
beacon frames when 802.11K capability is enabled. A value of "Disabled" prevents
the advertisement of the QBSS Load IE in the beacon frames when 802.11K
capability is enabled. The default value is "Enabled".
Table 91:
RRM IEParameters