Filter
Top Products
Hardware Installation
2−45CM 4000 Installation and Operating Manual
CP 3808 Control Panel
Figure 2−53. CP 3808.
23
45
789
0
6
1
VTR CG NET
VCR CAM REM
TEST
MISC
AUX
FILM PTCH STU
SAT
EDIT
FS
STILL
Take
Clear
Menu
The CP 3808 control panel is a 16−category, full−matrix,* multiple level breakaway panel capable of locking and protecting
outputs. The panel features eight−character display capability and relegendable, lighted push buttons.
As an option, the CP 3808 can be operated in connection with an adjacent CP 3809 Expansion Panel (see page 2−48) or a
CP 3810 Expansion Panel (see page 2−54).
Hardware installation
Installation of this panel is shown on page 2−37.
If desired, the panel hardware can be tested, and window/button brightness adjusted, without being connected to the controller
board (CM 4000). For more information, see Diagnostics Mode on page 6−71.
Software configuration
The CP 3808 panel can display eight−character mnemonics for inputs and outputs. To accomplish this create a CP Level Set of
type “3800” (page 5−58), a CP Input Set of type “3808” (page 5−67), and a CP Output Set of type “3808” (page 5−82). These
sets are among those assigned to each panel using the MPK Devices table (page 5−107).
Although the panel is capable of full−matrix operation, it can be restricted to control selected outputs, or even restricted to
control of a single output if desired. Such restrictions are made using the MPK Devices table (page 5−112).
Since the keycaps are relegendable, the CP 3808’s CP Input and Output Sets can use a custom CP Category set (page 5−102).
Before the panel can be used, these sets must be compiled, and the appropriate configuration set made active using the Control
Center (page 5−13).
Operation
For operating instructions, see page 6−64.
* Defined in Glossary Section