Filter
Top Products
9−1CM 4000 Installation and Operating Manual
Section 9 − Control Center
The JNS Control Center, which replaces the JNIA Control Center, has four tabs:
• The Board Status tab (page 9−1) shows a list of boards with status and up time.
• The TFTP* Status tab (page 9−2) shows the state of TFTP transfers to boards.
• The Board Info/Control tab (page 9−3) allows you to see board information and send commands to boards.
• The Configuration tab (page 9−6) allows you to select configurations and activate them.
BOARD STATUS
Figure 9−1.
The Board Status tab shows board status and up−time.
The first column lists the board names in the order that they appear in the Network Description table (note that PC boards
do not appear here).
The second column shows the board status. The fields will be green if the board is active. If boards are inactive, “Inactive”
will appear in the field and the field will be red. If a board is currently downloading, “LOADING...” will appear in the field,
and the field will be cyan.
The third column shows how long the boards have been up in days, hours, minutes and seconds. For the up−time display to
be accurate you must have selected the correct Scan Rate option in the options menu (see below).
* See Glossary.