Filter
Top Products
Control Panel Operation
CP 3824
6−84 CM 4000 Installation and Operating Manual
1. Press MENU three times.
The word “STICKY” appears in the Current window.
2. Use UP/DOWN to toggle the display to “ON?”
3. Press TAKE.
If more than six levels have been defined, UP/DOWN will increment through additional pages of levels. When multiple
pages of levels exist, the Preset display will prompt PG 1 (2, 3, etc.) next to the “ON,” and allow the user to select addi-
tional pages for toggling on or off the level.
This activates the six “temporary level” buttons (the outlined buttons in Figure 6−117). Lighted buttons initially indicate
defined levels.
LEFT
321
456
VTR 002
CURRENT
PRESET
Figure 6−117.
These six buttons function as temporary
level select keys in Sticky mode.
4. Toggle OFF the level(s) you don’t want to switch.
5. Press TAKE.
Sticky mode is now active, as indicated by the blinking LEVEL button.
To make a switch when sticky levels are in effect, select the desired input. Only the sticky levels will switch.
To find out which levels are sticky, press MENU three times; then press TAKE. The appropriate temporary level keys will
illuminate.
To cancel sticky levels, press MENU three times, then use UP/DOWN to toggle the display to “STICKY NOW OFF.” Then
press CLEAR or TAKE.