Filter
Top Products
Configurator
Delegation Groups
5−149CM 4000 Installation and Operating Manual
Delegation Groups
1
Delegation Group
Name
STU
2 ENG
3 TAPE
4
Figure 5−128. Delegation groups menu (example).
Password 5−22
Network Description 5−27
Serial Protocol 5−30
Switcher Description 5−35
Switcher Input 5−48
Switcher Output 5−55
Control Panel Sets
Level set 5−58
Input set 5−62
Output set 5−78
Override set 5−96
Sequence set 5−99
Category set 5−101
MPK Devices 5−107
Machines 5−135
Machine Control 5−139
Delegation Groups
Status Display Header 5−150
VGA Status Display 5−151
Tally 5−152
Path Finding 5−174
Exclusion 5−188
Y Line 5−189
Time Standard G−11
Video Reference G−14
CM VGA Options H−1
The Delegation Groups menu, in conjunction with the Machine Control menu, can be used to restrict control of machines
to a particular panel or group of panels. The Delegation Groups menu is used to establish group names.
PERMANENT DELEGATION
To assign a machine to a particular control panel on a permanent basis, use the Machine Control menu to enter the group name
of the panel in the “Delegation Group” column for the machine.
2
Machine Control
Device Name Device Type
Delegation
In/Out
Associated
3
4
Mnemonic
VT01
Sony Mch STU In VT01
VC01
Sony Mch STU In VC01
VC02 Sony Mch STU In VC02
Group Name
VT01
VC01
VC02
STUMC MC−3000 STU InSTUMC1
Figure 5−129.
In this example (Figure 5−129), all three Sony machines have been permanently assigned to the “STU” MC 3000.
Important: The delegation system requires all control panels to be assigned to a group. Any control panel not
assigned to a group will continue to have access to all machines, even if those machines have been assigned to a
group.