Filter
Top Products
Software Control Panel Suite
7−26 CM 4000 Installation and Operating Manual
SALVO PANEL
Figure 7−16.
The Salvo screen provides the ability to switch multiple source/destination combinations with a single Take.
Multiple Source/Destination Switching (Salvo)
1. The Salvo Setup function should be On (indicated by a red button label) and the Mem function should be Off (indi-
cated by a black button label).
2. Select the first desired Source Entry button.
Additional Source Entries buttons, if available, are accessed by using the scroll buttons. The label of the selected
button will change from black to yellow. Selection of a different source will deselect the previous source selection.
3. Select the desired “Destination Entries” buttons.
Each source/destination entry will be entered automatically in the Salvo list window in the lower center of the dis-
play.
Additional Destination Entries buttons, if available, are accessed by using the scroll buttons. The label of the se-
lected button will change from black to yellow. Additional destinations can be switched to the currently selected
source by selecting the desired Destination Entries buttons. The button label will change from black to yellow for
each selected destination. To remove a destination from the switch setup select that button again. This will deselect
that output and change the button label from yellow to black.