Filter
Top Products
COPYRIGHT
©
2000 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
6-23
CHAPTER 6 IMAGE FORMATION SYSTEM
3. Pre-Transfer Charging Assembly Cleaning Mechanism
Part 2>Chapter 5>10.1
Figure 6-306 Construction of the Control System
Wire cleaner
Wire
Pre-transfer charging assembly
rear
front
DC controller PCB
1
1
3
4
8
9
19
PSTWC-HP
PSTWC-RV
PSTWC-FW
0V
J504A
2
Home position
sensor (MSW3)
Pre-transfer
charging wire
cleaning motor
(M7)
When '1', the wire cleaner moves toward the front.
When the wire cleaner reaches
the home position, '0'.
When '1', the wire cleaner moves toward the rear.
[1] The surface temperature of the fixing roller is 100˚C or lower when the control panel power switch
is turned on.
[2] The wire cleaning mechanism is turned on in user mode.
[3] At the end of LSTR after making 2000 prints following wire cleaning.
Timing of Cleaning
The wire cleaner does not reach the home position in a
specific period of time.
E066
(wire cleaner home position error)
Related Error Code