Filter
Top Products
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
12-9
CHAPTER 12 MAINTENANCE AND SERVICING
Table 12-401-2
Unit
Photosensitive
drum
Photosensitive
drum
Use alcohol and drum
cleaning powder (CK-
0429); for steps, see
B.2. "Work Steps."
Developing
assembly
Cleaner
Developing cylinder
Developing
assembly roll
Fixing
assembly
Magnet roller For details of work,
see item 2 of
B.2."Work."
Delivery
assembly
Separation claw
(upper/lower)
Waste toner case Check/remove.
Transfer guide
Registration roller
(upper, lower)
Feeding belt
Various feeding
rollers
Inlet guid
Cleaning belt Remove the slack at
installation.
Oil receptacle
Thermistor
No. 2 thermistor
Thermal switch
Toner replace the
(rear/front)
For details of work,
see item 1 of
B.1."Work."
Slip ring electrode
(for drum heater)
Clean the following with
alcohol; then, apply
grease (FY9-6008):
• electrode of the slip
ring
• protrusion of
electrode
• static brush
: Clean
: Replace : Oil : Adjust : Inspect
Part
Intervals
Instal-
lation
Remarks
every
250,000
every
500,000
every
750,000
every
1,000,000
Waste toner
collecting
mechanism
Pickup/feeding
assembly
Duplexing
horizontal
registration sensor
Duplexing
assembly