Filter
Top Products
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
13-211
CHAPTER 13 TROUBLESHOOTING
<DEVELOP>
Adjusting the Developing Bias Output
<DENS>
Fine-Adjusting Copy Density Auto Correction
Level 3
DE-DC
DE-NO-
DC
DE-
OFST
Description
Use it to enter a DC bias output value for the image
area.
Use it to enter a developing bias output value for
sheet-to-sheet distance.
Use it to adjust the offset value of the developing DC
bias.
Remarks
Range: 0 to 500
• If you have replaced the
IP PCB or initialized the
RAM on the IP PCB,
enter the value recorded
on the service label.
Range : -50 to 50
• If you have replaced the
IP PCB or initialized the
RAM on the IP PCB,
enter the value recorded
on the service label.
Level 3
DENS-
ADJ
Description
Correcting Copy Density
• Use it to correct the f-value table if the copy image is
foggy or the high-density area is blurred.
Remarks
Range : 0 to 9 (default at 3)
Lighter image
Lower value
Higher value
Darker image
White
Copy density
Black
Original density
White
F9
F1
A lower setting
decreases fogging.
A higher setting
decreases blurring.
COPIER>ADJUST