Filter
Top Products
COPYRIGHT
©
2000 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
13-263
CHAPTER 13 TROUBLESHOOTING
Code
E590
E593
E585
E594
E583
E577
E595
Item
• Punch rotation motor
(M18)
• Punch rotation home
position sensor (PI44)
• Paddle motor (M9)
• Shutter home position
sensor (PI13)
• Punch paper edge sensor
home position sensor
(PI45)
• Punch sensor shift motor
(M19)
• Punch registration motor
(M17)
• Punch side registration
home position sensor
(PI46)
• Paddle motor (M9)
• Paddle home position
sensor (PI14)
• Tray auxiliary plate motor
(M6)
• Tray auxiliary plate housing
sensor (PI11)
• Punch waste feed motor
(M16)
• Punch waste feed sensor
(PI54)
Description
• The punch rotation home position sensor does not detect
the punch rotation home position when the punch
rotation motor has been driven for 0.4 seconds or longer.
• The punch rotation home position sensor does not turn
off when the punch rotation motor has been driven for 1
second or longer while the punch rotation home position
is detected.
• The shutter home position sensor does not turn on when
the paddle motor has been driven for 5 seconds (for
returning to the home position).
• The punch paper edge sensor home position sensor does
not detect the home position when the punch sensor shift
motor has been driven for 5 seconds or longer.
• The punch paper edge sensor home position sensor does
not turn off when the punch sensor shift motor has been
driven for 5 seconds or longer while the punch paper
edge sensor home position is detected.
• The tray auxiliary plate housing sensor does not turn on
when the tray auxiliary plate motor has been driven for 2
seconds.
• The punch side registration home position sensor does
not detect the home position when the punch registration
motor has been driven for 5 seconds or longer.
• The punch side registration home position sensor does
not turn off when the punch registration motor has been
driven for 5 seconds or longer while the punch side
registration home position is detected.
• The paddle home position sensor does not detect the
paddle when the paddle motor has been driven for 5
seconds.
• The punch waste feed sensor remains unchanged in its
output when the punch waste feed motor has been driven
for 2 seconds or longer.