Filter
Top Products
9-54
COPYRIGHT
©
1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
Figure 9-D709
7. Removing the Lifter Drive
Assembly (right deck)
Construction
1) Remove the rear cover.
2) Remove the high-voltage transformer
(DC).
3) Remove the flywheel.
4) Remove the drum gear.
5) Remove the waste toner pipe.
6) Remove the screw, and loosen the harness
guide [1]; disconnect the two connectors
[2], and remove the four screws [3]; then,
detach the lifter drive assembly (for the
right deck) [4].
[3]
[3] [3][2]
[2]
[1]
[4]