Filter
Top Products
CHAPTER 13 TROUBLESHOOTING
13-208
COPYRIGHT
©
2000 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
<ADJ-XY>
Adjusting the Image Read Start Position
Level 3
ADJ-Y
ADJ-X
ADJ-S
Description
Adjusting the CCD Read Start Position
• Enter a value to adjust the read start position.
Adjusting the Scanner Image Leading Position
• Enter a value to adjust the image leading edge
position.
Adjusting the Scanner Home Position
• Enter a value to adjust the home position (standard
white plate read position).
Remarks
Range : 360 to 1360 (each
'12' causes a shift of 1
mm)
Range : 0 to 2970 ('12'
causes a shift of 1 mm)
• Be sure to execute this
mode before adjusting
the margin.
• Do not create a margin
using this mode.
Range : 0 to 4
• If dirt exists on the
standard white plate, use
this mode to avoid
reading the area.
Vertical
size plate
Standard white plate
Higher
setting
Lower
setting
Copyboard glass
Home position sensor
COPIER>ADJUST
Vertical
size plate
Standard whit plate
Higher
setting
Lower
setting
Copyboard glass
Image leading edge sensor
Lower value
Higher value
Original
Vertical size plate
Read start position